[cisco-voip] CallManager 8.0 with SIP Trunk to 3945 with PRIS

[Jason Aarons (AM)]

CallManager 8.0 with SIP Trunk to 3945 with PRIs to AT&T

I see at the gateway I get a unallocated/disconnected number from telco however the end user on 7942 continues to hear ringback instead of a message the number is disconnected, etc.

Is there something I can change in callmanager for the Annunciator to play a error, etc?

323512: Jun 27 08:38:09.997 CDT: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callref = 0x5B5F
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98381
                Exclusive, Channel 1
        Calling Party Number i = 0x2181, '6012082500'
                Plan:ISDN, Type:National
        Called Party Number i = 0x80, '16016841901'
                Plan:Unknown, Type:Unknown
323513: Jun 27 08:38:10.049 CDT: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8  callref = 0xDB5F
        Channel ID i = 0xA98381
                Exclusive, Channel 1
323514: Jun 27 08:38:11.541 CDT: ISDN Se0/0/0:23 Q931: RX <- PROGRESS pd = 8  callref = 0xDB5F
        Cause i = 0x8481 - Unallocated/unassigned number
        Progress Ind i = 0x8488 - In-band info or appropriate now available
323515: Jun 27 08:38:50.921 CDT: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8  callref = 0xDB5F
        Cause i = 0x8490 - Normal call clearing
323516: Jun 27 08:38:50.921 CDT: ISDN Se0/0/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110627/9f92e32d/attachment.html>