[cisco-voip] Phones Not Getting Auth, Idle, Services URLS, etc

[Matthew Loraditch]

I am doing a new install and I cannot get the phones to pull these, they pull their configs as the lines work, can make and take calls, but they only show one active CM (yes the CMG has all servers) and all the config URLS are blank . This is 8.5.1SU1.
I am sure there is something I am missing but I can't figure it out. This is only happening so far on 794X phones. My CIPC gets everything fine.


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110629/202c71cc/attachment.html>