[cisco-voip] ucm 8.5 vmware network issues

[cips]

Hi all,

 

I’m running UCM 8.5.1.11900-21 in a LAB under VMWARE server 2.0. And I have
serious networking issues with the system.

Installation of the software went fine, system worked after installation,
could access the web interface. Did not install or upgrade anything.
Activated all services.

System boots but there is no network connectivity.

 

Interface UP à yes

Can ping loopback à yes

Can ping local address à yes

Can ping default gateway or any other IP on the same network à NO

 



 

Is UCM only supported on ESXi? And not on VMWARE Server? Can this be the
issue?

My other VMWARE’s of UCM 7.0, 6,0 run just fine.

 

When I run “system utils shutdown” I got the message “Shutdown operation
appears to be stuck”. After a couple of seconds it continued.

But with the message “NETDEV WATCHDOG: eth0: transmit times out” and
“vmxnet_close: failed to finish all pending tx” and a scary one “this
virtual machine may be in an inconsistent state”.

 

cid:image001.png at 01CBD7E1.6D90F120

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110301/57aa146f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 30400 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110301/57aa146f/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 23553 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110301/57aa146f/attachment-0001.png>