[cisco-voip] MGCP with CUCM 8.5

[Ahmed Elnagar]

Hi all;

 

I am planning to upgrade CUCM to version 8.5 and currently running 4.2 L

 

I have the following gateways as MGCP; I want to know if they are going
to work normally with current software or not:

 

2600 series router version 12.3(11)YZ2

1700 series router version 12.3(14)T3

 

Best Regards,

Ahmed Elnagar | CCIE#24697 Voice

 

Raya IT - Professional Networking Services

Mobile    : +20190016211

Tel          : +20238276000 Ext. 2475

Fax         : +20238372930

Email      : ahmed_elnagar at rayacorp.com
<mailto:ahmed_elnagar at rayacorp.com> 
Address : El Motamayez District - 6th of October

 

 

Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110302/6e6b6ffa/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1183 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110302/6e6b6ffa/attachment.jpg>