[cisco-voip] Easiest way to upgrade CM 3.3 to CUCM 8.5 with phone model replacement

Matthew Loraditch MLoraditch at heliontechnologies.com
Wed Mar 9 08:59:51 EST 2011


Well in 7.x or 8.x you can migrate phones so that you can move (hopefully) all those settings from the 7900s to the 8900s.
I have not used the migration tool so I'm not sure if it gets everything but should be a lot easier than reprogramming everything.
So do your upgrade and then  you can do a mass migration using BAT.


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ki Wi
Sent: Wednesday, March 09, 2011 8:44 AM
To: Cisco VoIP List
Subject: [cisco-voip] Easiest way to upgrade CM 3.3 to CUCM 8.5 with phone model replacement

Any idea?
I have experience of upgrading in upgrading CM3.3 --> 4.X ---> 7.X.
To 8.X should be 1 extra steps away.

However, the problem is customers will be replacing all their existing 7940/60 series IP phones to newer 8 series.

If customer prefer to keep their existing user settings like speed dial on each individual phones, what's the best way to do it?

Any tricks to run some sort of commands on the CM 3.3 SQL and extract the neccessary information? I don't mind setting up everything (partition/css/route pattern) all over again except those user/phone configurations (such as extension number/speed dial buttons/personal speed dial in their user profiles)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110309/3bd832a5/attachment.html>


More information about the cisco-voip mailing list