[cisco-voip] SRST Outbound calls Issue

[sheref hf]

Hi all,
 
Greetings
 
I have Gateway connected to CUCM act as SRST 
when the Connection with CUCM failed
the IP Phones registered with SRST very well
 
but the problem is these IP Phones "In SRST " can't make calls through GW FXO Ports although I created dial-peer for this 
FXO Ports connected to PBX and I send all digits with 9 and PBX route the call

dial-peer voice 11 pots
 trunkgroup PSTN
 destination-pattern 9T
 forward-digits all
 
 
 
 
Is there any other configuration adding on SRST configuration 
 
call-manager-fallback
 max-conferences 8 gain -6
 transfer-system full-consult
 ip source-address 10.255.5.154 port 2000
 max-ephones 42
 max-dn 144
 
 
 

thanks
 
 
Best Regards,
 
Sherif Ibrahem Mohamed
Network Engineer
Silicon21NIT Services
 

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110310/8b83841a/attachment.html>