[cisco-voip] SRST Outbound calls Issue

Ryan Schwab schwaby81 at shaw.ca
Thu Mar 10 13:32:53 EST 2011


Do you want to send the leading 9 to the PSTN provider? Also, with this
single dialpeer users will experience inter-digit timeout. By default
pressing # is the terminator.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of sheref hf
Sent: March-10-11 3:14 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] SRST Outbound calls Issue

 

Hi all,
 
Greetings
 
I have Gateway connected to CUCM act as SRST 
when the Connection with CUCM failed
the IP Phones registered with SRST very well
 
but the problem is these IP Phones "In SRST " can't make calls through GW
FXO Ports although I created dial-peer for this 
FXO Ports connected to PBX and I send all digits with 9 and PBX route the
call

dial-peer voice 11 pots
 trunkgroup PSTN
 destination-pattern 9T
 forward-digits all
 
 
 
 
Is there any other configuration adding on SRST configuration 
 
call-manager-fallback
 max-conferences 8 gain -6
 transfer-system full-consult
 ip source-address 10.255.5.154 port 2000
 max-ephones 42
 max-dn 144
 
 
 

thanks

 

 

Best Regards,

 

Sherif Ibrahem Mohamed

Network Engineer

Silicon21NIT Services

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110310/ec413a3c/attachment.html>


More information about the cisco-voip mailing list