[cisco-voip] Telecom Guy vs Network Guy.....

[Jason Aarons (US)]

With debug isdn q931 the need for a T-Berd is reduced. Both sides can monitor the d-channel. I can say only once in the last 5 years when there was bad demarc wiring did I need a T-Berd to provide it was the telco.

If you still have T-1 CAS you need to keep that T-Berd around...

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Vance Shipley
Sent: Thursday, March 10, 2011 6:44 PM
To: Scott Voll
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Telecom Guy vs Network Guy.....

The CSUs are falling out of their life cycles so using the inbuilt functions is probably the right course.

What you should definetly not do is remove the DSX monitor points in your wiring.  Your T-berd is of little use if you can't jack it in!

-- 
	-Vance
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.