[cisco-voip] Is it possible...

[Corson, Teressa]

I apologize in advance if this is a dumb question.  

 

Is it possible to connect an old Polycom SoundStation conference phone
to an FXS port on my gateway router and have the calls go out my PRI?
We're using CUCM 7.1.3.  We don't use any analog phones on our system so
far so I have no experience in what it might take to make this work, if
it's possible.  Thanks for any info that might point me in the right
direction.


T.

 

Teressa Corson, CCNP, CCDA, CCNA-Voice
TSS VI, Operations
Network Operations
NH Department of Information Technology
603-223-5727
www.nh.gov/doit <http://www.nh.gov/doit> 

 

Statement of Confidentiality:  The contents of this message are
confidential.  Any unauthorized disclosure, reproduction, use or
dissemination (either in whole or in part) is prohibited.  If you are
not the intended recipient of this message, please notify the sender
immediately and delete the message from your system.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110311/778153ac/attachment.html>