[cisco-voip] Is it possible...

[Paul]

Yes it is possible. You can configure the FXS port to be controlled by SCCP and 
then configure it just like any other IP phone on CUCM.


________________________________
From:"Corson, Teressa" <Teressa.Corson at doit.nh.gov>
To:cisco-voip at puck.nether.net
Sent: Fri, March 11, 2011 6:21:08 AM
Subject: [cisco-voip] Is it possible...


I apologize in advance if this is a dumb question.  
 
Is it possible to connect an old Polycom SoundStation conference phone to an FXS 

port on my gateway router and have the calls go out my PRI?    We’re using CUCM 
7.1.3.  We don’t use any analog phones on our system so far so I have no 
experience in what it might take to make this work, if it’s possible.  Thanks 
for any info that might point me in the right direction.

T.
 
Teressa Corson, CCNP, CCDA, CCNA-Voice
TSS VI, Operations
Network Operations
NH Department of Information Technology
603-223-5727
www.nh.gov/doit
 
Statement of Confidentiality:  The contents of this message are confidential.  
Any unauthorized disclosure, reproduction, use or dissemination (either in whole 

or in part) is prohibited.  If you are not the intended recipient of this 
message, please notify the sender immediately and delete the message from your 
system.