[cisco-voip] 7965 Forward all lines

[Kevin Damisch]

This has been requested for years on the 7900 series phones.  Am I correct in assuming that this will never be implemented then on the 7900 series phones?  I have done this on an 8961 and works great being able to have 5 line appearances and the ability to call-forward all on each of the lines from the phone.  Looks like we need to upsell, huh?

Thanks,
Kevin

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Monday, March 14, 2011 12:57 PM
To: Lelio Fulgenzi
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 7965 Forward all lines

Keep in mind CUCM treats each line as separate from the device it lives on.  You can't configure CFA on a device, you configure it on a line, and it will apply to all instances of that line.  The capability on a device is called DND but you can't pick a dynamic DND destination.

-Ryan

On Mar 14, 2011, at 1:41 PM, Lelio Fulgenzi wrote:


As others have said, this is only capable from the CCMuser page as far as I know. Some later versions of CUCM have enabled this, but I believe only for some models (69xx,89xx,99xx).

At the root of the problem is that the 7900 series phones have not been programmed to reflect the current forwarding state of anything but the primary line, so even when you do forward non-primary lines, nothing on the phone tells you this is case.

There are some third party applications that you can buy which will allow the user to forward non-primary lines from the phone, but again, without the ability to reflect forwarding state, there are limited. Some of them have gone so far as to edit the line text label to include forwarding state, but this breaks other line text label settings.

Good luck.

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

________________________________
From: "Neal Haas" <nhaas at co.fresno.ca.us<mailto:nhaas at co.fresno.ca.us>>
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Monday, March 14, 2011 12:22:29 PM
Subject: [cisco-voip] 7965 Forward all lines
Right now when I press the CFWDALL button, only the main line is forwarded. How can I change the default behavior to forward all the lines on a 7965 with CFWDALL?

Thank you

Neal Haas


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


________________________________

This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110315/921fde6b/attachment.html>