[cisco-voip] Why is my CUBE sending my dial-peers instead of login information to Skype Connect?

Paul asobihoudai at yahoo.com
Tue Mar 15 16:34:04 EDT 2011


I've only heard of something like that when someone is calling into an FXO port. 
Weird.


----- Original Message ----
From: Robert Kulagowski <rkulagow at gmail.com>
To: Stephen Welsh <stephen.welsh at unifiedfx.com>
Cc: Paul <asobihoudai at yahoo.com>; Cisco VOIP <cisco-voip at puck.nether.net>
Sent: Tue, March 15, 2011 1:26:58 PM
Subject: Re: [cisco-voip] Why is my CUBE sending my dial-peers instead of login 
information to Skype Connect?

On Tue, Mar 15, 2011 at 3:20 PM, Robert Kulagowski <rkulagow at gmail.com> wrote:
> On Tue, Mar 15, 2011 at 3:00 PM, Stephen Welsh <stephen.welsh at unifiedfx.com> 
>wrote:
>> Might be a codec negotiation issue, have you looked at the SDP messages using 
>>'debug ccsip message' on the router?
>
> Yes. Now, what exactly am I looking at? :)

The issue was on the H.323 leg to Call Manager.  I needed to enable
Inbound Fast Start, apply the config, then reset the gateway.  Viola!
It works!

However, the caller hears two rings before the first ring is generated
on the called party's phone.  Is that normal?



      


More information about the cisco-voip mailing list