[cisco-voip] Integrating 9971 with Polycom MCU

[Ryan Ratliff]

To the traces!  

If an audio only call works then it's likely a capabilities mismatch in the H.245 exchange.  Unless Polycom has a better way to debug this then you're looking at turning H.245 debug messages in the ccm traces and looking there.

-Ryan

On Mar 16, 2011, at 4:59 PM, Ruben Trujillo wrote:

Hi Scott,
 
Thanks for the info.  I’ve created the h323 gateway using the IP address of the Polycom MCU as well as a route pattern that uses that gateway under the “Gateway/Route List” field.  I get a fast busy though when I attempt to dial a Polycom endpoint though.
 
Thanks,
Ruben Trujillo
IT Telecom
 
From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Wednesday, March 16, 2011 1:31 PM
To: Ruben Trujillo
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Integrating 9971 with Polycom MCU
 
not sure about the 9971 but the 7961 with Video we have our polycom RMX2000 setup as a h323 gateway with a route pattern setup.  you dial the route and then enter your conference ID.
 
Scott

On Wed, Mar 16, 2011 at 9:35 AM, Ruben Trujillo <rtrujill at adobe.com> wrote:
Hello,
 
Does anyone have any info on how to get a Cisco 9971 working with a Polycom MCU?
 
Thanks,
Ruben
 
<image001.png>
Ruben Trujillo
Telecom Engineer
Adobe Systems
408.536.6006 (tel)
415.407.1646 (cell)
rtrujill at adobe.com
345 Park Ave
San Jose, CA. 95110
www.adobe.com
 
 
 
 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110316/7d354d82/attachment.html>