[cisco-voip] callerID from HiCom300E to CallManager

[Lelio Fulgenzi]

OK. thanks. likely related to the number of endpoints. We have less than 500, but still, even at 5 dollars a pop, that's 2500. 

I might still request a quote, you never know. If it's cheap enough, we might go for it now. 

Thanks again. 

Lelio 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Chris Chamberlain" <chamberl at oakland.edu> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: cisco-voip at puck.nether.net 
Sent: Wednesday, March 16, 2011 5:38:01 PM 
Subject: Re: [cisco-voip] callerID from HiCom300E to CallManager 

I want to say its dependent on the size of your hicom?? I don't think I ever understood the quote from Siemens...but yes it was in the thousands for us...YMMV 


-Chris 




On Mar 16, 2011, at 5:34 PM, Lelio Fulgenzi wrote: 




Thanks Chris. I don't see NQISO available on the trunk configuration drop down menu for protocol. I'm guessing the license adds this option. 

Do you recall how much the license was? hundreds? thousands? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Chris Chamberlain" < chamberl at oakland.edu > 
To: "Lelio Fulgenzi" < lelio at UOGUELPH.CA > 
Cc: cisco-voip at puck.nether.net 
Sent: Wednesday, March 16, 2011 5:25:38 PM 
Subject: Re: [cisco-voip] callerID from HiCom300E to CallManager 

If I recall correctly we had to purchase a Cornet-NQ license from Siemens in order to get both the number as well as the ASCII display. On the trunk on the siemens side we have it configured for NQISO and qsig on the cisco gateway. 


Chris Chamberlain 
Network Engineer 
Oakland University 




On Mar 16, 2011, at 4:58 PM, Lelio Fulgenzi wrote: 




Just wondering if anyone out there has got caller ID working back and forth from CallManager to a HiCom 300E. 

We've sort of accepted that we can't do it, but this was configured way before my time. I've got a small opportunity to test and apply some changes, but the few things I've done already don't seem to work. 

We're using 6608s and currently configure as NI2. 

Any hints? 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110316/f0a2918a/attachment.html>