[cisco-voip] callerID from HiCom300E to CallManager

[Rick Gilliam]

Cornet was originally designed to tie (2) Siemens Hicom's or HiPath systems together offering enhanced Clid, Ext and Names to the called end.
Qsig offers only  connectivity and trunk information, nothing more.
On the Cisco side, if debug Q931 is on you will see very little useable information coming from the Siemens system on the D-Channel so, the customer expectations need to be set low before the implementation begins.

Rick G


 


From: chamberl at oakland.edu
Date: Wed, 16 Mar 2011 17:38:01 -0400
To: lelio at uoguelph.ca
CC: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] callerID from HiCom300E to CallManager


I want to say its dependent on the size of your hicom??  I don't think I ever understood the quote from Siemens...but yes it was in the thousands for us...YMMV


-Chris




On Mar 16, 2011, at 5:34 PM, Lelio Fulgenzi wrote:


Thanks Chris. I don't see NQISO available on the trunk configuration drop down menu for protocol. I'm guessing the license adds this option.

Do you recall how much the license was? hundreds? thousands?

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)




From: "Chris Chamberlain" <chamberl at oakland.edu>
To: "Lelio Fulgenzi" <lelio at UOGUELPH.CA>
Cc: cisco-voip at puck.nether.net
Sent: Wednesday, March 16, 2011 5:25:38 PM
Subject: Re: [cisco-voip] callerID from HiCom300E to CallManager

If I recall correctly we had to purchase a Cornet-NQ license from Siemens in order to get both the number as well as the ASCII display.  On the trunk on the siemens side we have it configured for NQISO and qsig on the cisco gateway.


Chris Chamberlain
Network Engineer
Oakland University




On Mar 16, 2011, at 4:58 PM, Lelio Fulgenzi wrote:


Just wondering if anyone out there has got caller ID working back and forth from CallManager to a HiCom 300E.

We've sort of accepted that we can't do it, but this was configured way before my time. I've got a small opportunity to test and apply some changes, but the few things I've done already don't seem to work.

We're using 6608s and currently configure as NI2.

Any hints?


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it. 
                              - LFJ (with apologies to Mr. Popeil)


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110317/36850f67/attachment.html>