[cisco-voip] Question about Unity Connection 8.x cluster - mix different server platforms?

[Pat Hayes]

>From the system requirements doc:

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html#wp360177

"For a cluster with two physical servers, both must have the same
platform overlay."

So they don't need to be exact matches, but I believe the currently
shipping 7825 and 7835 are different platform overlays, so you would
be out of luck there.

On Tue, Mar 22, 2011 at 8:49 PM, David Lee <d16lee at gmail.com> wrote:
> Hello,
>
>
>
> I understand that for a UCM cluster, you can use different servers (i.e.
> 7825/7835/7845) in the same cluster.  It is less clear whether you can do
> that in a Unity Connection cluster.  For example, can I run a Unity
> Connection 8.x cluster with both a MCS-7835 and MCS-7825 servers as
> publisher / subscriber?  I understand that the capacity will be based on the
> smaller server, but I like to know if this is a supported architecture.
>
>
>
> Thanks in advance.
>
>
>
> -Dave
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>