[cisco-voip] v15 boot system command

[Matthew Loraditch]

Did you try boot system flash: or boot system disk0:
I’m guessing the file system name just changed as I know the command is still there on the ISRs


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com<mailto:support at heliontechnologies.com>
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com<http://www.heliontechnologies.com/>
Support Issue? Email support at heliontechnologies.com<mailto:support at heliontechnologies.com> for fast assistance!

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Wednesday, March 23, 2011 10:28 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] v15 boot system command

So I upgraded a VG224 from v12 to v15. Not too much of an issue, but I noticed that after the upgrade was done, there was no "boot system slot0:" command.

From what I recall, with no "boot system" command, it boots with the first(?) IOS image listed. I'm guessing v15 won't look at a v12 IOS image, but what happens when I load another v15 image onto the box?

What have others seen?

Lelio


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110323/fb625501/attachment.html>