[cisco-voip] v15 boot system command

[Lelio Fulgenzi]

yeah, the list has been a bit slow in processing today. must be the snow. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Matthew Loraditch" <MLoraditch at heliontechnologies.com> 
To: "Matthew Loraditch" <MLoraditch at heliontechnologies.com>, "Lelio Fulgenzi" <lelio at uoguelph.ca>, cisco-voip at puck.nether.net 
Sent: Wednesday, March 23, 2011 1:57:04 PM 
Subject: RE: [cisco-voip] v15 boot system command 




Or it could be what others have said in the hours it took this to get to the list since I hit send! :) 






Matthew Loraditch, CCVP, CCNA, CCDA 
1965 Greenspring Drive 

Timonium, MD 21093 
support at heliontechnologies.com 
(p) (410) 252-8830 
(F) (443) 541-1593 

Visit us at www.heliontechnologies.com 
Support Issue? Email support at heliontechnologies.com for fast assistance! 





From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch 
Sent: Wednesday, March 23, 2011 12:32 PM 
To: Lelio Fulgenzi; cisco-voip at puck.nether.net 
Subject: Re: [cisco-voip] v15 boot system command 



Did you try boot system flash: or boot system disk0: 

I’m guessing the file system name just changed as I know the command is still there on the ISRs 






Matthew Loraditch, CCVP, CCNA, CCDA 
1965 Greenspring Drive 

Timonium, MD 21093 
support at heliontechnologies.com 
(p) (410) 252-8830 
(F) (443) 541-1593 

Visit us at www.heliontechnologies.com 
Support Issue? Email support at heliontechnologies.com for fast assistance! 





From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi 
Sent: Wednesday, March 23, 2011 10:28 AM 
To: cisco-voip at puck.nether.net 
Subject: [cisco-voip] v15 boot system command 




So I upgraded a VG224 from v12 to v15. Not too much of an issue, but I noticed that after the upgrade was done, there was no "boot system slot0:" command. 

>From what I recall, with no "boot system" command, it boots with the first(?) IOS image listed. I'm guessing v15 won't look at a v12 IOS image, but what happens when I load another v15 image onto the box? 

What have others seen? 

Lelio 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110323/d9944a95/attachment.html>