[cisco-voip] Interpreting "+" on 7942/62 on v7.1.5b.SU3

[Lelio Fulgenzi]

Our custom corporate directory has off-net numbers formatted as follows: 


+9[+1]-NXX-XXXX 

Obviously, that doesn't follow any standard whatsoever but up until now it's been working fine. 

When testing this with 7942/62 with FW 9.1.1SR1 on 4.1(3) it works, but on v7.1(5b)SU3 it does not work. I thought it had something to do with EnBloc dialing as suggested by Wes, but it turns out it's not. (I did not include the fact that I had a + in the digit string back then). 

When I test by holding the * key down and it changes to a +, I immediately get the same error tone. 

Am I correct in my diagnosis that the + key is the issue here and that we should remove any plus signs from the output? 

Thanks, Lelio 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110329/330a90c4/attachment.html>