[cisco-voip] Cisco 99xx Phone Question

[Lewis, Chris]

I am trying to configure a "lobby" phone and a reception desk phone which are both 9951's.

The "lobby" phone does have a camera attached and the reception desk one doesn't so I can allow 1 way calls.  This works and I can configure PLAR as expected. The issue is that I am unable to remove the  Show/Hide Video from the "lobby" phone when the call is connected.  I have looked through everything and cannot see a way.

Is this not possible?

If not has anyone set these phones up in lobbys etc and if so how have you achieved your goal?


Chris




The information contained in this message and its attachments 
is intended only for the private and confidential use of the 
intended recipient(s).  If you are not the intended recipient 
(or have received this e-mail in error) please notify the 
sender immediately and destroy this e-mail. Any unauthorized 
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110331/9a7ab2c4/attachment.html>