[cisco-voip] Cisco 99xx Phone Question

[Ryan Ratliff]

On the security concerns the existing wall mounts for those phones do a very good job of securing the camera.  You'd have to yank very hard on the camera to get it out.

-Ryan

On Mar 31, 2011, at 11:26 AM, Lewis, Chris wrote:

Yeah I found that too.

Thanks for the info Wes.


-----Original Message-----
From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: 31 March 2011 16:22
To: Lewis, Chris
Cc: Jason Aarons (US); Paul; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco 99xx Phone Question

very interesting use case.  I checked with several folks and none could come up with a way to remove that specific softkey.  They pointed out that video mute can't be disabled either.

Regards,
Wes

On 3/31/2011 9:58 AM, Lewis, Chris wrote:
> Thanks for that - Will check it out.
> 
> Yes and a wall mount  :-)
> 
> The 99xx don't allow you to edit softkeys - you can use the feature control policy which covers some parts but not all.
> 
> You are correct in your assumption of my issue.
> 
> 
> 
> -----Original Message-----
> From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com]
> Sent: 31 March 2011 14:55
> To: Paul; Lewis, Chris; cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Cisco 99xx Phone Question
> 
> I've only used the Algosolutions.com callbox or similar.
> 
> I would think your 9951 lobby phone with a camera would need a theft 
> cable lock :)
> 
> Can you edit the softkey template to remove show/hide?  Is the problem someone can call the receptionist and hit hide?
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Paul
> Sent: Thursday, March 31, 2011 9:29 AM
> To: Lewis, Chris; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Cisco 99xx Phone Question
> 
> Do you not want video on the phone at all? If so, just pull the usb camera out.
> . . that'll disable it for sure.
> 
> 
> 
> 
> ________________________________
> From:"Lewis, Chris"<Chris.Lewis at magnetar.com>  
> To:"cisco-voip at puck.nether.net"<cisco-voip at puck.nether.net>
> Sent: Thu, March 31, 2011 4:00:16 AM
> Subject: [cisco-voip] Cisco 99xx Phone Question
> 
> 
> I am trying to configure a “lobby” phone and a reception desk phone which are both 9951’s.
> 
> The “lobby” phone does have a camera attached and the reception desk 
> one doesn’t
> 
> so I can allow 1 way calls.  This works and I can configure PLAR as expected.
> The issue is that I am unable to remove the  Show/Hide Video from the “lobby”
> phone when the call is connected.  I have looked through everything and cannot see a way.
> 
> Is this not possible?
> 
> If not has anyone set these phones up in lobbys etc and if so how have you achieved your goal?
> 
> 
> Chris
> 
> 
> The information contained in this message and its attachments is 
> intended only for the private and confidential use of the intended 
> recipient(s).  If you are not the intended recipient (or have received 
> this e-mail in error) please notify
> 
> the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e- mail is strictly prohibited.
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> -----------------------------------------
> Disclaimer:
> 
> This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only.  If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful.  If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
> 
> The information contained in this message and its attachments is 
> intended only for the private and confidential use of the intended 
> recipient(s).  If you are not the intended recipient (or have received 
> this e-mail in error) please notify the sender immediately and destroy 
> this e-mail. Any unauthorized copying, disclosure or distribution of 
> the material in this e- mail is strictly prohibited.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

The information contained in this message and its attachments 
is intended only for the private and confidential use of the 
intended recipient(s).  If you are not the intended recipient 
(or have received this e-mail in error) please notify the 
sender immediately and destroy this e-mail. Any unauthorized 
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110331/0ef96365/attachment.html>