[cisco-voip] H.323 with multiple bindings...

[Jonathan Charles]

Ping works. but not between interfaces..

This is a binding isssue... we need to change the binding per call...

On Tue, May 3, 2011 at 11:02 AM, ccieid1ot <ccieid1ot at gmail.com> wrote:

> Can u do a source ping out from the private ip?  Could be a routing issue.
>
> duy
> ccie #27737 voice
>
> tmobile g2
> On May 3, 2011 10:59 AM, "Jonathan Charles" <jonvoip at gmail.com> wrote:
> > We have a customer with an H.323 trunk to a provider. The router this
> > terminates on has a private and public IP.
> >
> > However, we have bound the inside (private IP) as the H.323 address for
> CCM.
> > Calls are getting dead air because H.323 is bound to the private IP.
> >
> > Can I set on the dial-peer a binding for that peer, so if I match an
> > outgoing peer I can bind to the public interface, and if I match an
> inbound
> > peer I can bind tot he private interface?
> >
> > There is no NAT between the public and private.
> >
> >
> >
> > Jonathan
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110503/d742dacd/attachment.html>