[cisco-voip] H.323 with multiple bindings...

[ccieid1ot]

Paste the configs and how this router is bind to ccm.

duy
ccie #27737 voice

tmobile g2
On May 3, 2011 11:05 AM, "Jonathan Charles" <jonvoip at gmail.com> wrote:
> Ping works. but not between interfaces..
>
> This is a binding isssue... we need to change the binding per call...
>
> On Tue, May 3, 2011 at 11:02 AM, ccieid1ot <ccieid1ot at gmail.com> wrote:
>
>> Can u do a source ping out from the private ip? Could be a routing issue.
>>
>> duy
>> ccie #27737 voice
>>
>> tmobile g2
>> On May 3, 2011 10:59 AM, "Jonathan Charles" <jonvoip at gmail.com> wrote:
>> > We have a customer with an H.323 trunk to a provider. The router this
>> > terminates on has a private and public IP.
>> >
>> > However, we have bound the inside (private IP) as the H.323 address for
>> CCM.
>> > Calls are getting dead air because H.323 is bound to the private IP.
>> >
>> > Can I set on the dial-peer a binding for that peer, so if I match an
>> > outgoing peer I can bind to the public interface, and if I match an
>> inbound
>> > peer I can bind tot he private interface?
>> >
>> > There is no NAT between the public and private.
>> >
>> >
>> >
>> > Jonathan
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110503/d7b018b0/attachment.html>