[cisco-voip] Cisco ATA 187 and connection plar

[Ryan Ratliff]

SIP phones don't signal offhook to CUCM in the same way SCCP phones do so there is no opportunity for CUCM to treat it as a call with no dialed number. 

For SIP you need to configure dial rules.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmsys/a03adial.html#wpmkr1039674

-Ryan

On May 4, 2011, at 9:06 AM, Anthony Kouloglou wrote:

Hi, i have followed cisco recommendations to simulate hot line support for CUCM 7.1.5.
These recommendations are:
created a blank translation pattern that has a partition that is included only in a css that a few devices have.
This TP, has an Called Party Transform mask mask of a target DN.
So, when, one of these phones go offhook, it matches this TP and dials the appropriate number.
But this does not seem to work with ATA 187.
Is does nothing when picking up the phone. 
Does it has to do with SIP?
Has anyone tried it before?
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110504/753fb70c/attachment.html>