[cisco-voip] IPC Dealer Turrets

[Russell Chaseling]

Thanks Chris.......project is not due to start for another 1-2 months yet. Good to hear that there are no problems with 8.5 and hopefully IPC might certify it by then and save me hunting around for an 8.03 install disc!!!

Russell

________________________________
From: Lewis, Chris [Chris.Lewis at magnetar.com]
Sent: 05 May 2011 13:43
To: Philip Walenta; Russell Chaseling; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] IPC Dealer Turrets

Not sure how far you’ve gone here but to let you know, IPC have not yet certified UCM 8.5.  They have approved 8.03 for QSIG and SIP.

Its interesting as I had to upgrade one of my clusters to 8.5 recently due to some other bugs and have not seen any issues from the IPC side (running QSIG).

Just an FYI

Chris

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Philip Walenta
Sent: 23 April 2011 20:59
To: 'Russell Chaseling'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] IPC Dealer Turrets

Like others here have mentioned the integration was originally done with QSIG over ISDN.  It worked extremely well.

I have done several installs with IPC personnel and they are nothing if not exceptionally good at what they do.

If they say they will support SIP you can better believe they’ve tested it in very extreme ways as typically turret systems are used in mission critical applications that do not tolerate failure.   Just be prepared for some insane network setups as these guys are picky.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Russell Chaseling
Sent: Tuesday, April 19, 2011 12:26 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] IPC Dealer Turrets

Hi all,

I am looking to integrate some IPC Dealer Turrets with a new installation of CUCM 8.5. Has anyone had any experience integrating these IPC Turrets before? If so I would really appreciate any helpful info on the topic? i.e QSIG or SIP or either, any gotchas etc

Haven't got an exact model number yet but can find out

Many thanks in advance

Russell



The information contained in this message and its attachments
is intended only for the private and confidential use of the
intended recipient(s).  If you are not the intended recipient
(or have received this e-mail in error) please notify the
sender immediately and destroy this e-mail. Any unauthorized
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110505/1ad93b4c/attachment.html>