[cisco-voip] Call forward to specified number on specified hours

[Ted Nugent]

I've actually done this a few times and Lelio's advise is pretty close to
what I've done.
I typically create a TOD-PT set the schedule on the TOD-PT to appear during
the specified schedule(time period)
Create my CFwd-CSS with TOD-PT order before my normal Phones-PT and assign
it to the CFB/CFNA/CFALL CSS on the Lines your looking to forward
I then create an intercept Translation pattern in the TOD-PT to forward to
my off hour device

Example
During normal hour I have CFNA/CFB to extension 5555 in the Phone-PT
During off hours my TP of 5555 in the TOD-PT will become active within the
CFwd-CSS and the calls to 5555 will be intercepted to 5555 and go to someone
cell phone or whatever you have the TP configured to go.









On Sun, May 8, 2011 at 10:53 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> I know that you can use partitions and time schedules to do time of day
> routing.
>
> here's what i would do:
>
> line 1: extension 5555 in partition daytime_pt (with appropriate schedule)
> line 2: extension 5555 in partition nighttime_pt (with appropriate
> schedule)
>
> extension 5555 has ring no answer set to forward appropriately with a low
> ring no answer timeout
>
> this way, if the person at the phone is there, they can try to answer the
> phone.
>
> i haven't used partitions and schedules so i could be off my rocker.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ------------------------------
> *From: *"Robert Hass" <robhass at gmail.com>
> *To: *cisco-voip at puck.nether.net
> *Sent: *Sunday, May 8, 2011 9:43:51 AM
> *Subject: *[cisco-voip] Call forward to specified number on specified
> hours
>
>
> Hi
> Is it possible to forward one number (eg. DN 600 to DN 700) on
> specified hours (18:00 - 07:00) on CM 4.2 or CUCM 8.0 ?
> I thinking about scripting (AXL for 8.0 and SQL based on 4.2) but
> maybe there is a simpler solution to do this ?
>
> Robert
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110509/16e56dd1/attachment.html>