[cisco-voip] Upgrade 4.0.2a to 8.5.1

[Nick]

Ok, well we can try this first by running it up in a vmware and then
upgrading then taking a backup, I just completed a 4.2.3 to 7.1.5,then to
8.5.1 using this method and it worked a treat with no issues.



On 12 May 2011 18:05, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> there were some issues with upgrading from 5/6 to 7/8 i think. something
> about disk space and logging. you might be better off upgrading from 4 to
> 4.1(3) and then from there to 7.1(3) to 8.x
>
> you might be able to get around the logging issue by taking a DRF, then
> re-installing and restoring.
>
> Just a thought, something to think about.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ------------------------------
> *From: *"Erick A. Wellnitz" <erick.wellnitz at kattenlaw.com>
> *To: *"Nick" <csvoip at googlemail.com>, cisco-voip at puck.nether.net
> *Sent: *Thursday, May 12, 2011 1:00:47 PM
> *Subject: *Re: [cisco-voip] Upgrade 4.0.2a to 8.5.1
>
>
>  DMA 6.0.1a.exe is available in the software downloads on the Cisco site.
> I just downloaded it.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Nick
> *Sent:* Thursday, May 12, 2011 11:49 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Upgrade 4.0.2a to 8.5.1
>
>
>
> Hi All
>
>
>
> I have a job to complete an upgrade from 4.0.2a to 8.5.1, obviously there
> will be a number of steps involved but looking at the compatibility matrix
> it says you can do a Direct Upgrade using DMA from 4.0.2a to 6.0.1 and
> 6.1.1. The only available versions of DMA are 7.1.2, 7.1.3 and 7.1.5 and the
> release notes for these state that its for versions 4.1.3, 4.2.3 and 4.3.1.
>
>
>
> So is this going to be possible and do I need an older version of DMA or
> has the compatibility matrix got a typo.
>
>
>
> Anyone done a similar upgrade from 4.0.2a.?
>
>
>
> Cheers
>
>
>
> Nick
>
> ===========================================================
> CIRCULAR 230 DISCLOSURE: Pursuant to Regulations Governing Practice Before the Internal Revenue
> Service, any tax advice contained herein is not intended or written to be used and cannot be used
> by a taxpayer for the purpose of avoiding tax penalties that may be imposed on the taxpayer.
> ===========================================================
> CONFIDENTIALITY NOTICE:
> This electronic mail message and any attached files contain information intended for the exclusive
> use of the individual or entity to whom it is addressed and may contain information that is
> proprietary, privileged, confidential and/or exempt from disclosure under applicable law.  If you
> are not the intended recipient, you are hereby notified that any viewing, copying, disclosure or
> distribution of this information may be subject to legal restriction or sanction.  Please notify
> the sender, by electronic mail or telephone, of any unintended recipients and delete the original
> message without making any copies.
> ===========================================================
> NOTIFICATION:  Katten Muchin Rosenman LLP is an Illinois limited liability partnership that has
> elected to be governed by the Illinois Uniform Partnership Act (1997).
> ===========================================================
>
>
> _______________________________________________
> cisco-voip mailing list
>
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110512/d53e8bef/attachment.html>