[cisco-voip] Adding Mobility button to 8961

[Ki Wi]

Hi Joe,
I tried. It's working however it seems like the new method is taking up too
much phone buttons.

Imaging I have to enable mobility, meet-me and call park, I'm left with 2
buttons to be used for lines or maybe 1 line 1 speed dial.

Is there any workaround?

On Thu, May 19, 2011 at 1:47 AM, Ki Wi <kiwi.voice at gmail.com> wrote:

> I see, will try that out tomorrow.
>
> Thanks a lot , Joe!
>
> On Wed, May 18, 2011 at 7:52 PM, Joe Martini <joemar2 at cisco.com> wrote:
>
>> You have to add it to a phone button instead of a softkey on 89xx and 99xx
>> phones.
>>
>> Joe
>>
>> On May 18, 2011, at 5:30 AM, Ki Wi wrote:
>>
>> Hi everyone,
>> How do I activate the mobility button (softkey)  on 8961?
>>
>> In the past on older phones, i just need to modify the softkey template.
>> However, now I can't seems to find the option.
>>
>> In this setup, I'm using 8.5.1SU1. Feature control policy doesn't have
>> this option.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110523/33198a55/attachment.html>