[cisco-voip] Hunt call on PSTN

[cips]

As far as I know this is not possible, the FXO is a 1 line connection, so
only one call can go through. See it as one channel.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Just Kennie
Sent: donderdag 26 mei 2011 11:26
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Hunt call on PSTN

 

Hi Expert,

I have a small situation, I have a PSTN line (1234567) connected to my FXO
port, and PLAR configured on it, so that when the 1234567 is dial from
outside, it will automatically be routed to extension 111, it works prettly
well, but my client wants a sitation where many users can call the line and
it will be routed to different extension inside without giving a busy tone,
below are my questions.

 

- Can the FXO port allow simultaneus call through?

-What need to be done on the FXO port (or dial peers) that will ensure this?

-Do I need the PSTN provider to configure the line for multiple calls, or I
can achieve this without them?

-Whats do I need to configure on my router (gateway) to achief this?


Cheers,
Idowu Kehinde
TEL: 2348024017748
BB:  30E8E5F9

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110526/b4417510/attachment.html>