[cisco-voip] Video Integrations - CUCM and VCS Control

[Dana Tong]

Hi all,

We have the following setup:

CUCM 8.0(2)
CUPS 8.0(2)
CUPC 8.5(1)
Tandberg VCS Control X5.1
Various Tandberg and Polycom VC units
Codian MSE 8000 - ver 4.1(1.59)

We are receiving the following results:
CUCM - VCS Control (SIP) No video for CUPC to VC Rooms. (I haven't tried via the MCU unfortunately)

CUCM - VCS Control (H323)

Everyone dials the MCU (CUPC, Tandberg, Polycom) = All OK!
CUPC Softphone to MCU - All Ok
CUPC Softphone to Tandberg - All Ok
CUPC Softphone to Polycom - All Ok

CUPC Deskphone Video to MCU - All Ok
CUPC Deskphone Video to Tandberg - One-way Video. Video received at Tandberg. No Video at CUPC, however CUPC has audio.
CUPC Deskphone Video to Polycom - One-way Video. Video received at Tandberg. No Video at CUPC, however CUPC has audio.

Have tried this with three different phones/ models (7965, 7961, 7941) and have had the same results. Firmware on the 7965 is 9.0(2) SCCP.

Would anyone have any suggestions on getting Deskphone video to work directly with the VC rooms? (ie not via the MCU).

Thanks
Dana



______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110530/be6491d5/attachment.html>