[cisco-voip] Skype with CME

[Cristobal Priego]

have you enabled the following debug ?
debug ccsip messages

if not why don't you enable it and try to make a call


2011/5/31 sheref hf <sheref_hf at hotmail.com>

>  Hi all,
>
> I have CME and I wanna to make international calls via skype server
> I made sip channel in skype and make sip sonfiguration in my CME
> and skype is now registered with my CME
>
> the issue is I can't make calls via skype they give me busytone
>
>
> this is my configuration :
>
>
> sip-ua
>  credentials username 9905100010xxxx password removed realm sip.skype.com
>  authentication username 9905100010xxxx password removed
>  no remote-party-id
>  retry register 10
>  mwi-server dns:sip.skype.com expires 3600 port 5060 transport udp
> unsolicited
>  registrar dns:sip.skype.com expires 3600
>  sip-server dns:sip.skype.com
>
>
> dial-peer voice 6000 voip
>  destination-pattern .T
>  voice-class codec 1
>  session protocol sipv2
>  session target sip-server
>  dtmf-relay rtp-nte
>  ip qos dscp cs5 media
>  no vad
>
> ephone-dn  25  dual-line
>  number 99051000135867
>
>
>
> Can anybody help me to solve this problem ...???
>
>
>
> BR,
>
>
>
> *Sherif *
>
> Network Engineer
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110531/fb620e45/attachment.html>