[cisco-voip] No Conf Bridge Available

[Ki Wi]

Can you remove the software conference bridge from the MGL?

Make sure that the hw conf is in the MGL as well as support all the codec which is in use? 

Sent from my iPhone
Pls pardon my fat fingers.

On 8 Nov, 2011, at 1:26 PM, "Jason Aarons (AM)" <jason.aarons at dimensiondata.com> wrote:

> Have a MRG/MRGL setup for IOS Enhanced Conf Bridge, so software resources, when I go to use the router for Conf I get No Conf Bridge Available even show show sccp all shows it registered.
>  
> Ccm traces shows a lot of “Key=ATL2821_CFB not in RemoteDeviceInfo hashmap” error messages
>  
> Jason Aarons
> Consultant
> Dimension Data
> 904-338-3245 mobile
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111108/fd5b7d64/attachment.html>