[cisco-voip] Subscriber Failure after power loss, is there any way to salvage this install?

[Jorge L. Rodriguez Aguila]

Wes;

Quick q, the ariginal deployment for this site was 7.X, I got mixed up with another site I built, Can I insert the 7.X and still put the 8.5.1SU3 CD as the patch or will I need to borrow the 8.5.1 cd from another deployment?

Jorge

________________________________
From: Wes Sisk <wsisk at cisco.com>
To: Jorge L. Rodriguez Aguila
Cc: 'cisco-voip at puck.nether.net' <cisco-voip at puck.nether.net>
Sent: Mon Nov 07 17:50:10 2011
Subject: Re: [cisco-voip] Subscriber Failure after power loss, is there any way to salvage this install?

I believe you will need to use the install with upgrade option.  Answer yes during the install when it asks if you want to apply a patch.

On Nov 7, 2011, at 4:27 PM, Jorge L. Rodriguez Aguila wrote:

Thanks for the answer, the Pub is Running 8.5.1SU3, any issues running the install with 8.5.1 and the upgrading to 8.5.1SU3??

Jorge

________________________________
From: Wes Sisk <wsisk at cisco.com<mailto:wsisk at cisco.com>>
To: Jorge L. Rodriguez Aguila
Cc: Cisco-Voip (cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>) <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Mon Nov 07 17:14:16 2011
Subject: Re: [cisco-voip] Subscriber Failure after power loss, is there any way to salvage this install?

you could try the recovery CD. but even that recommends a re-install after usage.

insert disk1, install fresh, and get this server off to a good and healthy start.

/wes

On Nov 7, 2011, at 12:16 PM, Jorge L. Rodriguez Aguila wrote:

Or should I insert the DVD and start anew??

This is What I see when I login via cli or through the monitor directly on the server.

Command Line Interface is starting up, please wait ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/cisco/alarmutil/GenericAlarmWrapper
        at com.cisco.iptplatform.cli.cliAlarms.<init>(cliAlarms.java:71)
       at com.cisco.iptplatform.cli.cliAlarms.instance(cliAlarms.java:95)
        at sdMain.main(sdMain.java:701)
Caused by: java.lang.ClassNotFoundException: com.cisco.alarmutil.GenericAlarmWrapper
        at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
        ... 3 more




Jorge L. Rodriguez Aguila
CCNA, CCNP-VOICE
Senior Voice/Data Consultant
Tel-787-765-0058
Cel 787-688-8530
jorge.rodriguez at netxar.com<mailto:jorge.rodriguez at netxar.com>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111108/9dec3cd8/attachment.html>