[cisco-voip] Uploading Phone Firmware for 8.5

[Wes Sisk]

depending on the status of the phones you may *need* to install the .cop file to get the .defaults file that comes with that load. there are situations where that is the only file the phones will parse. to that end installing the .cop file is the only way to get (or updated) that file.

/wes

On Nov 8, 2011, at 10:42 AM, Mike King wrote:

I have a shiny new 8.5.1 deployment.  However we just found some older phones in the warehouse that still have firmware 8.1.1 or something like that on them.  

I'll have to upload a bridge firmware for the phones, (We used SCCP45.8-5-2S before we upgraded)

Should I download the COP file, and install it, and then change all my default loads back?

Should I download the Zip file, and just upload the SCCP45.8-5-2S.loads and *.sbn files?

Mike
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip