[cisco-voip] ISR 2800 support in new CUCM 8.6 (and future 9.x)clusters

Nate VanMaren VanMarenNP at ldschurch.org
Wed Nov 9 11:22:40 EST 2011


Don’t some of the 2800s have soldered RAM too?

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Wednesday, November 09, 2011 9:15 AM
To: Ruben Montes (Europe)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future 9.x)clusters

i don't think you'll get away with "opening" it, you'll have to actually open it.

sorry - the quotes always throw me. ;)

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)

________________________________
From: "Ruben Montes (Europe)" <ruben.montes at dimensiondata.com<mailto:ruben.montes at dimensiondata.com>>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>>
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Wednesday, November 9, 2011 11:12:31 AM
Subject: RE: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future 9.x)clusters


Me neither, I think I’ll have to “open” the chassis to be 100% sure…

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]<mailto:[mailto:lelio at uoguelph.ca]>
Sent: miércoles, 09 de noviembre de 2011 17:11
To: Ruben Montes (Europe)
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future 9.x)clusters

wow. don't know what to say there.

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)
________________________________
From: "Ruben Montes (Europe)" <ruben.montes at dimensiondata.com<mailto:ruben.montes at dimensiondata.com>>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>>
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Wednesday, November 9, 2011 11:02:26 AM
Subject: RE: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future 9.x)clusters

Hi,

Regarding the show platform, the show version displays 256MB RAM, but the show platform only 128MB in the Dimm 0, no information for the Dimm 1 (it doesn’t even appear). Can I assume there are two x 128MB RAM DIMMs?

Thxs,

Ruben

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca]<mailto:[mailto:lelio at uoguelph.ca]>
Sent: miércoles, 09 de noviembre de 2011 15:51
To: Ruben Montes (Europe)
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future 9.x) clusters


Try: show platform

It should give you something like this near the end:
________________________________
Dimm 0 SPD data :
Size of dimm                 = 512 Megabytes
<snip>
Dimm 1 SPD data :
Memory Slot Empty

RTC chip is DS1337
________________________________

Regarding upgrading or refresh, Cisco makes the bundles quite competitive, and depending on your SRST requirements, you might be able to get a smaller router and accomplish the same things, saving money. It's a little like your old car, how much money do you put into it before you decide to buy a new one. In actuality, in this case, it's easier, the router is EOL and won't support new SRST versions. Period. (grrrrr).

I am confused with what you mean by the minimum SRST for CUCM. SRST and CUCM are not tightly connected as far as I know. What dictates what version of SRST you need is based on things like CUE (if installed), phone load version, and IOS version.

Hope that helps

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)
________________________________
From: "Ruben Montes (Europe)" <ruben.montes at dimensiondata.com<mailto:ruben.montes at dimensiondata.com>>
To: "cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>" <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Sent: Wednesday, November 9, 2011 5:07:43 AM
Subject: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future 9.x)        clusters
Hi,

I’m upgrading customer’s CCM 4.x cluster to CUCM 8.6. They’re using 28xx with SRST. In the compatibility guide it says we should go to, at least, SRST 8.6 for CUCM8.x. So I need to upgrade to 15.1(4)M, which requires more RAM that we have now. Is there any way to know from the CLI the DIMMs that are being used so I know if I should to buy 512DRAM DIMMs or 256DRAM DIMMs?

If you have faced this same scenario and as 28xx have been EoS on 1/11/11, do you think it is worth invest in DRAM and CF upgrade for this platform? Last SRST version (8.8) does not support 28xx and I think the same will happen soon with IOS. Also, we can have “inside” the 28xx some old cards already in the last stages of their lifecycle like VWIC first generation, PVDM2, AIM-CUE etc.

Then, upgrade or refresh with new 29xx? What’s your opinion (let’s leave apart the economic question ☺ ?

Thanks,

Ruben



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


itevomcid


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111109/b2f40234/attachment.html>


More information about the cisco-voip mailing list