[cisco-voip] ISR 2800 support in new CUCM 8.6 (and future 9.x)clusters

[Mike King]

Yes.

I have a 2801, that shows
Dimm 0 SPD data :
Size of dimm                 = 256 Megabytes

No Dimm 1
and  show ver show's 358400K

Mike


On Wed, Nov 9, 2011 at 11:22 AM, Nate VanMaren <VanMarenNP at ldschurch.org>wrote:

>  Don’t some of the 2800s have soldered RAM too?****
>
> ** **
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Lelio Fulgenzi
> *Sent:* Wednesday, November 09, 2011 9:15 AM
>
> *To:* Ruben Montes (Europe)
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
> 9.x)clusters****
>
>  ** **
>
> i don't think you'll get away with "opening" it, you'll have to actually
> open it.
>
> sorry - the quotes always throw me. ;)
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
> ****
>  ------------------------------
>
> *From: *"Ruben Montes (Europe)" <ruben.montes at dimensiondata.com>
> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca>
> *Cc: *cisco-voip at puck.nether.net
> *Sent: *Wednesday, November 9, 2011 11:12:31 AM
> *Subject: *RE: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
> 9.x)clusters
>
>
> ****
>
> Me neither, I think I’ll have to “open” the chassis to be 100% sure…****
>
>  ****
>
> *From:* Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
> *Sent:* miércoles, 09 de noviembre de 2011 17:11
> *To:* Ruben Montes (Europe)
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
> 9.x)clusters****
>
>  ****
>
> wow. don't know what to say there.
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)****
>  ------------------------------
>
> *From: *"Ruben Montes (Europe)" <ruben.montes at dimensiondata.com>
> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca>
> *Cc: *cisco-voip at puck.nether.net
> *Sent: *Wednesday, November 9, 2011 11:02:26 AM
> *Subject: *RE: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
> 9.x)clusters
>
> ****
>
> Hi,****
>
>  ****
>
> Regarding the show platform, the show version displays 256MB RAM, but the
> show platform only 128MB in the Dimm 0, no information for the Dimm 1 (it
> doesn’t even appear). Can I assume there are two x 128MB RAM DIMMs?****
>
>  ****
>
> Thxs,****
>
>  ****
>
> Ruben****
>
>  ****
>
> *From:* Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
> *Sent:* miércoles, 09 de noviembre de 2011 15:51
> *To:* Ruben Montes (Europe)
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
> 9.x) clusters****
>
>  ****
>
>  ****
>
> Try: show platform
>
> It should give you something like this near the end:****
>  ------------------------------
>
> Dimm 0 SPD data :
> Size of dimm                 = 512 Megabytes
> <snip>
> Dimm 1 SPD data :
> Memory Slot Empty
>
> RTC chip is DS1337****
>  ------------------------------
>
>
> Regarding upgrading or refresh, Cisco makes the bundles quite competitive,
> and depending on your SRST requirements, you might be able to get a smaller
> router and accomplish the same things, saving money. It's a little like
> your old car, how much money do you put into it before you decide to buy a
> new one. In actuality, in this case, it's easier, the router is EOL and
> won't support new SRST versions. Period. (grrrrr).
>
> I am confused with what you mean by the minimum SRST for CUCM. SRST and
> CUCM are not tightly connected as far as I know. What dictates what version
> of SRST you need is based on things like CUE (if installed), phone load
> version, and IOS version.
>
> Hope that helps
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)****
>  ------------------------------
>
> *From: *"Ruben Montes (Europe)" <ruben.montes at dimensiondata.com>
> *To: *"cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
> *Sent: *Wednesday, November 9, 2011 5:07:43 AM
> *Subject: *[cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
> 9.x)        clusters****
>
> Hi,****
>
>  ****
>
> I’m upgrading customer’s CCM 4.x cluster to CUCM 8.6. They’re using 28xx
> with SRST. In the compatibility guide it says we should go to, at least,
> SRST 8.6 for CUCM8.x. So I need to upgrade to 15.1(4)M, which requires more
> RAM that we have now. Is there any way to know from the CLI the DIMMs that
> are being used so I know if I should to buy 512DRAM DIMMs or 256DRAM DIMMs?
> ****
>
>  ****
>
> If you have faced this same scenario and as 28xx have been EoS on 1/11/11,
> do you think it is worth invest in DRAM and CF upgrade for this platform?
> Last SRST version (8.8) does not support 28xx and I think the same will
> happen soon with IOS. Also, we can have “inside” the 28xx some old cards
> already in the last stages of their lifecycle like VWIC first generation,
> PVDM2, AIM-CUE etc.****
>
>  ****
>
> Then, upgrade or refresh with new 29xx? What’s your opinion (let’s leave
> apart the economic question J ?****
>
>  ****
>
> Thanks,****
>
>  ****
>
> Ruben****
>
>  ****
>
>  ****
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip****
>
>
>
> itevomcid ** **
>
>
>
> NOTICE: This email message is for the sole use of the intended
> recipient(s) and may contain confidential and privileged information. Any
> unauthorized review, use, disclosure or distribution is prohibited. If you
> are not the intended recipient, please contact the sender by reply email
> and destroy all copies of the original message.
> ****
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111109/007bf422/attachment.html>