[cisco-voip] ISR 2800 support in new CUCM 8.6 (and future 9.x)clusters

[Mike King]

I switched the subject line on this (I know it's still not going to thread
right)

What version of IOS is on the h323 gateway.  Sounds like your not on the
right IOS version.

Mike

On Wed, Nov 9, 2011 at 2:58 PM, gwenzit at gmail.com <gwenzit at gmail.com> wrote:

> I just upgraded a client  from 4.1.3 to 8.6.2-20000-2  the gateways are
> h323. Srst is supported but not for 7965/7945... Older phones yes in srst
>
> Sent from my HTC on the Now Network from Sprint!
>
> ----- Reply message -----
> From: "Lelio Fulgenzi" <lelio at uoguelph.ca>
> Date: Wed, Nov 9, 2011 2:32 pm
> Subject: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
> 9.x)clusters
> To: "Mike King" <me at mpking.com>
> Cc: "Ruben Montes \(Europe\)" <ruben.montes at dimensiondata.com>, <
> cisco-voip at puck.nether.net>
>
>
> You can also use kingston.com to get an idea. They're a great resource
> for figuring out stuff like this.
>
> Although it only shows non-removable memory [ 256MB (Non-removable) DRAM ]
> for the 2811.
>
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> Cooking with unix is easy. You just sed it and forget it.
>                               - LFJ (with apologies to Mr. Popeil)
>
>
> ------------------------------
> *From: *"Mike King" <me at mpking.com>
> *To: *"Nate VanMaren" <VanMarenNP at ldschurch.org>
> *Cc: *"Lelio Fulgenzi" <lelio at uoguelph.ca>, "Ruben Montes (Europe)" <
> ruben.montes at dimensiondata.com>, cisco-voip at puck.nether.net
> *Sent: *Wednesday, November 9, 2011 1:43:16 PM
>
> *Subject: *Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
> 9.x)clusters
>
> Yes.
>
> I have a 2801, that shows
> Dimm 0 SPD data :
> Size of dimm                 = 256 Megabytes
>
> No Dimm 1
> and  show ver show's 358400K
>
> Mike
>
>
> On Wed, Nov 9, 2011 at 11:22 AM, Nate VanMaren <VanMarenNP at ldschurch.org>wrote:
>
>>  Don’t some of the 2800s have soldered RAM too?****
>>
>> ** **
>>
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Lelio Fulgenzi
>> *Sent:* Wednesday, November 09, 2011 9:15 AM
>>
>> *To:* Ruben Montes (Europe)
>> *Cc:* cisco-voip at puck.nether.net
>> *Subject:* Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
>> 9.x)clusters****
>>
>>  ** **
>>
>> i don't think you'll get away with "opening" it, you'll have to actually
>> open it.
>>
>> sorry - the quotes always throw me. ;)
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Cooking with unix is easy. You just sed it and forget it.
>>                               - LFJ (with apologies to Mr. Popeil)
>>
>> ****
>>  ------------------------------
>>
>> *From: *"Ruben Montes (Europe)" <ruben.montes at dimensiondata.com>
>> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca>
>> *Cc: *cisco-voip at puck.nether.net
>> *Sent: *Wednesday, November 9, 2011 11:12:31 AM
>> *Subject: *RE: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
>> 9.x)clusters
>>
>>
>> ****
>>
>> Me neither, I think I’ll have to “open” the chassis to be 100% sure…****
>>
>>  ****
>>
>> *From:* Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
>> *Sent:* miércoles, 09 de noviembre de 2011 17:11
>> *To:* Ruben Montes (Europe)
>> *Cc:* cisco-voip at puck.nether.net
>> *Subject:* Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
>> 9.x)clusters****
>>
>>  ****
>>
>> wow. don't know what to say there.
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Cooking with unix is easy. You just sed it and forget it.
>>                               - LFJ (with apologies to Mr. Popeil)****
>>  ------------------------------
>>
>> *From: *"Ruben Montes (Europe)" <ruben.montes at dimensiondata.com>
>> *To: *"Lelio Fulgenzi" <lelio at uoguelph.ca>
>> *Cc: *cisco-voip at puck.nether.net
>> *Sent: *Wednesday, November 9, 2011 11:02:26 AM
>> *Subject: *RE: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
>> 9.x)clusters
>>
>> ****
>>
>> Hi,****
>>
>>  ****
>>
>> Regarding the show platform, the show version displays 256MB RAM, but the
>> show platform only 128MB in the Dimm 0, no information for the Dimm 1 (it
>> doesn’t even appear). Can I assume there are two x 128MB RAM DIMMs?****
>>
>>  ****
>>
>> Thxs,****
>>
>>  ****
>>
>> Ruben****
>>
>>  ****
>>
>> *From:* Lelio Fulgenzi [mailto:lelio at uoguelph.ca]
>> *Sent:* miércoles, 09 de noviembre de 2011 15:51
>> *To:* Ruben Montes (Europe)
>> *Cc:* cisco-voip at puck.nether.net
>> *Subject:* Re: [cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
>> 9.x) clusters****
>>
>>  ****
>>
>>  ****
>>
>> Try: show platform
>>
>> It should give you something like this near the end:****
>>  ------------------------------
>>
>> Dimm 0 SPD data :
>> Size of dimm                 = 512 Megabytes
>> <snip>
>> Dimm 1 SPD data :
>> Memory Slot Empty
>>
>> RTC chip is DS1337****
>>  ------------------------------
>>
>>
>> Regarding upgrading or refresh, Cisco makes the bundles quite
>> competitive, and depending on your SRST requirements, you might be able to
>> get a smaller router and accomplish the same things, saving money. It's a
>> little like your old car, how much money do you put into it before you
>> decide to buy a new one. In actuality, in this case, it's easier, the
>> router is EOL and won't support new SRST versions. Period. (grrrrr).
>>
>> I am confused with what you mean by the minimum SRST for CUCM. SRST and
>> CUCM are not tightly connected as far as I know. What dictates what version
>> of SRST you need is based on things like CUE (if installed), phone load
>> version, and IOS version.
>>
>> Hope that helps
>>
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (ANNU)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Cooking with unix is easy. You just sed it and forget it.
>>                               - LFJ (with apologies to Mr. Popeil)****
>>  ------------------------------
>>
>> *From: *"Ruben Montes (Europe)" <ruben.montes at dimensiondata.com>
>> *To: *"cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
>> *Sent: *Wednesday, November 9, 2011 5:07:43 AM
>> *Subject: *[cisco-voip] ISR 2800 support in new CUCM 8.6 (and future
>> 9.x)        clusters****
>>
>> Hi,****
>>
>>  ****
>>
>> I’m upgrading customer’s CCM 4.x cluster to CUCM 8.6. They’re using 28xx
>> with SRST. In the compatibility guide it says we should go to, at least,
>> SRST 8.6 for CUCM8.x. So I need to upgrade to 15.1(4)M, which requires more
>> RAM that we have now. Is there any way to know from the CLI the DIMMs that
>> are being used so I know if I should to buy 512DRAM DIMMs or 256DRAM DIMMs?
>> ****
>>
>>  ****
>>
>> If you have faced this same scenario and as 28xx have been EoS on
>> 1/11/11, do you think it is worth invest in DRAM and CF upgrade for this
>> platform? Last SRST version (8.8) does not support 28xx and I think the
>> same will happen soon with IOS. Also, we can have “inside” the 28xx some
>> old cards already in the last stages of their lifecycle like VWIC first
>> generation, PVDM2, AIM-CUE etc.****
>>
>>  ****
>>
>> Then, upgrade or refresh with new 29xx? What’s your opinion (let’s leave
>> apart the economic question J ?****
>>
>>  ****
>>
>> Thanks,****
>>
>>  ****
>>
>> Ruben****
>>
>>  ****
>>
>>  ****
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip****
>>
>>
>>
>> itevomcid ** **
>>
>>
>>
>> NOTICE: This email message is for the sole use of the intended
>> recipient(s) and may contain confidential and privileged information. Any
>> unauthorized review, use, disclosure or distribution is prohibited. If you
>> are not the intended recipient, please contact the sender by reply email
>> and destroy all copies of the original message.
>> ****
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111109/f99e5c90/attachment.html>