[cisco-voip] analog phone and autodial from gateway

[Lelio Fulgenzi]

google PLAR and you'll get plenty of examples. 

depending on your protocol, you can also configure this with partitions and CSS in call manager. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (ANNU) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Michael Muscat" <michaelm at umcu.org> 
To: cisco-voip at puck.nether.net 
Sent: Friday, November 11, 2011 10:06:18 AM 
Subject: [cisco-voip] analog phone and autodial from gateway 




Hi, 



I’m trying to get an plain telephone plugged into a FXS/DID or FXO card to autodial a number when it goes off hook and can’t figure it out! I have done it before but I can’t remember what needs to be done on the dial peer or voice port to achieve this. I have a working POTS line plugged into an FXO port and need a phone in the elevator to dial out to our alarm company when the phone is picked up. Any help would be appreciated. 







Thanks! 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111111/3f24007b/attachment.html>