[cisco-voip] Call routing questions

[Leslie Meade]

I have a client that has two groups of phones, one with e911 capabilities
and others with the normal 911.

They have only one gateway that is a h323 gateway with a sip trunk and a pri
circuit. Client wants to put the E911 calls out the sip trunk and the reg
911 out the pri.

All inbound and outbound calls are terminated on the SIP trunk. Any ideas on
how to do this ? Since there is already a 911 dial-peer for the isdn all 911
goes that way, I am thinking of running mgcp as well as h323 and place the
PRI into mgcp and work it from that angle.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111123/1cb5f975/attachment.html>