[cisco-voip] Branch Office CME SIP trunk question

[Dennis Heim]

So you have a CME, with a SIP trunk. You would need some type of messaging system such as SYN-APPS or Informacast. Have a script that parses the sip-ua status. Based on those results hit a url that would trigger a page/message to the phones.

Dennis Heim
Senior Engineer (Unified Communications)
CDW  Advanced Technology Services
10610 9th Place
Bellevue, WA 98004

425.310.5299 Single Number Reach (WA)
317.569.4255 Single Number Reach (IN)
317.569.4201 Fax 
dennis.heim at cdw.com
cdw.com/content/solutions/unified-communications/

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of cisco.voip
Sent: Thursday, November 24, 2011 6:26 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Branch Office CME SIP trunk question

All,
I have a branch office with the latest CUCME, about 15 users, the CME points everything back to HQ Call Mgr v7.1.
I am looking for a solution that could display on the CME connected phones, when the SIP Trunk is down.
So if the Branch loses it connection, the users know their phones aren't working by looking at the phone, vs get the dial tone and dial with no results?

Thanks,
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip