[cisco-voip] Branch Office CME SIP trunk question

[cisco.voip]

Is there an easier way, since I actually don't need the sip trunk 
status, just the ip connectivity status.
Could I run a local http service on the CME that displays an icon on the 
CME phone when the ip connection to
the HQ is down.

Thanks,

On 11/24/2011 7:27 PM, Dennis Heim wrote:
> So you have a CME, with a SIP trunk. You would need some type of messaging system such as SYN-APPS or Informacast. Have a script that parses the sip-ua status. Based on those results hit a url that would trigger a page/message to the phones.
>
> Dennis Heim
> Senior Engineer (Unified Communications)
> CDW  Advanced Technology Services
> 10610 9th Place
> Bellevue, WA 98004
>
> 425.310.5299 Single Number Reach (WA)
> 317.569.4255 Single Number Reach (IN)
> 317.569.4201 Fax
> dennis.heim at cdw.com
> cdw.com/content/solutions/unified-communications/
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of cisco.voip
> Sent: Thursday, November 24, 2011 6:26 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Branch Office CME SIP trunk question
>
> All,
> I have a branch office with the latest CUCME, about 15 users, the CME points everything back to HQ Call Mgr v7.1.
> I am looking for a solution that could display on the CME connected phones, when the SIP Trunk is down.
> So if the Branch loses it connection, the users know their phones aren't working by looking at the phone, vs get the dial tone and dial with no results?
>
> Thanks,
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>