[cisco-voip] 7937 not booting?

[Matt Slaga (AM)]

A 7937 requires the power brick, I don't believe these can take direct PoE.



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Monday, October 03, 2011 1:36 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7937 not booting?



I've tried a different port and cable.... but my 7937 just shows cisco on the display and never boots.  switch port is configured properly and it is getting POE.  I have done  the **1 factory reset without resolution.  any other ideas?

TIA

Scott


itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111003/f0a31791/attachment.html>