[cisco-voip] 7937 not booting?

[Kevin Damisch]

The 7937 does not require a power brick.  Just set one up yesterday with POE.

* Support for IEEE Power over Ethernet (PoE) or the Cisco Power Cube 3

Thanks,
Kevin

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matt Slaga (AM)
Sent: Monday, October 03, 2011 3:55 PM
To: Scott Voll; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 7937 not booting?

A 7937 requires the power brick, I don't believe these can take direct PoE.



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Monday, October 03, 2011 1:36 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 7937 not booting?



I've tried a different port and cable.... but my 7937 just shows cisco on the display and never boots.  switch port is configured properly and it is getting POE.  I have done  the **1 factory reset without resolution.  any other ideas?

TIA

Scott


itevomcid

________________________________

This communication (including any attachments) is intended only for the use of the individual or entity to which it is addressed, and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient, any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify Vital Support Systems at 515 334 5700 and delete or destroy all copies and the original document.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111003/8046e07c/attachment.html>