[cisco-voip] 911 call routing from Unity

[Lelio Fulgenzi]

You might be able to using routing rules to send calls to a specific call handler based on calling number so that it sends the call to a specific 911 route pattern using a prefix and then mark that call with the appropriate external mask so the right address shows up. 

This is not scalable unless all your extensions are in a certain range at each location. Of course, if you have lots of location DIDs, again, not scalable. 

Can you give us an example of how things are being used now? 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Patty Mangers" <patty.mangers at chemeketa.edu> 
To: cisco-voip at puck.nether.net 
Sent: Wednesday, October 5, 2011 4:49:24 PM 
Subject: [cisco-voip] 911 call routing from Unity 




We have several call handlers (Unity 5.0(1)) that besides caller input options need to be able to make a 911 call. Our current programming will route the calls to 911 but with incorrect addresses. There must be a way to program so that each location will deliver the correct address to PSAP. Anyone have any suggestions? 



Thanks! 



Patty Mangers 

Telephone Systems 

Chemeketa Community College 

503.399.7769 

patty.mangers at chemeketa.edu 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111005/48eb6dfa/attachment.html>