[cisco-voip] VG202 setup ...

[Lelio Fulgenzi]

The vg202 is an IOS device. Lots of stuff out there for that. Here's one I used myself. 

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsbasic.html 

Here's a snippet of my VG224 which should help you get SCCP ports up and running in pass-through. you'll have to configure the interfaces and stuff first though. We're using passthrough on all our gateways so it means setting all fax machines to 14.4 no ECM. This configuration attempts to register all ports, so make sure they're configured on CCM otherwise you get alarms. 



! 
version 15.0 
no service pad 
service timestamps debug datetime localtime 
service timestamps log datetime localtime 
service password-encryption 
! 
hostname <hostname> 
! 
boot-start-marker 
boot system slot0:vg224-i6s-mz.150-1.M3.bin 
boot-end-marker 
! 
logging buffered 4096 
! 
stcapp ccm-group 1 
stcapp 
! 
! 
voice service voip 
modem passthrough nse codec g711ulaw 
! 
! 
! 
voice-card 0 
! 
archive 
log config 
hidekeys 
! 
! 
! 
! 
! 
! 
! 
sccp local <interface> 
sccp ccm <ipaddr1> identifier <id1> version <v> 
sccp 
! 
sccp ccm group 1 
associate ccm <id1> priority 1 
! 
dial-peer voice 200 pots 
service stcapp 
port 2/0 
! 
dial-peer voice 201 pots 
service stcapp 
port 2/1 
! 
dial-peer voice 202 pots 
service stcapp 
port 2/2 
! 
dial-peer voice 203 pots 
service stcapp 
port 2/3 
! 
dial-peer voice 204 pots 
service stcapp 
port 2/4 
! 
dial-peer voice 205 pots 
service stcapp 
port 2/5 
! 
dial-peer voice 206 pots 
service stcapp 
port 2/6 
! 
dial-peer voice 207 pots 
service stcapp 
port 2/7 
! 
dial-peer voice 208 pots 
service stcapp 
port 2/8 
! 
dial-peer voice 209 pots 
service stcapp 
port 2/9 
! 
dial-peer voice 210 pots 
service stcapp 
port 2/10 
! 
dial-peer voice 211 pots 
service stcapp 
port 2/11 
! 
dial-peer voice 212 pots 
service stcapp 
port 2/12 
! 
dial-peer voice 213 pots 
service stcapp 
port 2/13 
! 
dial-peer voice 214 pots 
service stcapp 
port 2/14 
! 
dial-peer voice 215 pots 
service stcapp 
port 2/15 
! 
dial-peer voice 216 pots 
service stcapp 
port 2/16 
! 
dial-peer voice 217 pots 
service stcapp 
port 2/17 
! 
dial-peer voice 218 pots 
service stcapp 
port 2/18 
! 
dial-peer voice 219 pots 
service stcapp 
port 2/19 
! 
dial-peer voice 220 pots 
service stcapp 
port 2/20 
! 
dial-peer voice 221 pots 
service stcapp 
port 2/21 
! 
dial-peer voice 222 pots 
service stcapp 
port 2/22 
! 
dial-peer voice 223 pots 
service stcapp 
port 2/23 
! 
! 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message -----
From: "Gerrad Biffle" <Gerrad.Biffle at greensboro-nc.gov> 
To: cisco-voip at puck.nether.net 
Sent: Thursday, October 6, 2011 10:26:33 AM 
Subject: [cisco-voip] VG202 setup ... 




Does anyone have a VG202 config they could share? Or any tips or tricks for setting these up? I’m having a time getting one built and registered to our CUCM. Trying to setup to replace an ATA that is giving us problems with faxing. 



Thanks in advance. 



Gerrad Biffle ======================================================= 
Please note that email sent to and from this address is subject 
to the North Carolina Public Records Law and may be disclosed to third parties. 
_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111006/1c6e0b15/attachment.html>