[cisco-voip] Cisco AS5400XM

[Cooke, Dave]

Currently have 8 in use for our Contact Centers, DS3 connections from the carrier - used as Ingress and Egress we are using channelized muxs to send calls to our IVR and Nortel 81Cs.  Work horse but in the last year we've had 5 power supplies go bad.

Thank you,

David Cooke

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kyle Sexton
Sent: Thursday, October 06, 2011 5:33 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco AS5400XM

I'm looking at the Cisco AS5400XM to convert some incoming T1s to SIP signaling.  Has anyone had any experience with these devices?  The feature cards that Cisco sells can be a little confusing.  I'm thinking something like below is what I need.

(1) AS5400XM, AS5400XM Starter Kit (inc Chassis, MB, Def Mem)
(1) AS54-AC-RPS-PWR, AS5400 AC Redundant Power Supply
(1) AS54-DFC-8CT1, AS5400 OCTAL T1/PRI DFC Card
(2) AS54-DFC-108NP, AS5400 108 Voice/Universal Port Feature Card

Any thoughts would be appreciated.  Thanks.


--
Kyle Sexton
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

This message and any attachments may contain confidential or privileged information and are intended only for the use of the intended recipients of this message. If you are not the intended recipient of this message, please notify the sender by return email, and delete this and all copies of this message and any attachments from your system. Any unauthorized disclosure, use, distribution, or reproduction of this message or any attachments is prohibited and may be unlawful.