[cisco-voip] Cisco AS5400XM

Lelio Fulgenzi lelio at uoguelph.ca
Sat Oct 8 14:23:08 EDT 2011


Cool, thanks. And, yeah, still no DS3 voice module, only ATM. 

Sent from my iPhone

On Oct 7, 2011, at 7:08 PM, Mark Holloway <mh at markholloway.com> wrote:

> These days there may not be a compelling reason.  Several years ago there was no channelized DS3 module for the ISR that would support 27 PRI's for SIP/PRI termination. Does a module like that exist for the ISR Gen2?  As for an AS5400 with 8xT1 ports, there are definitely other options. 
> 
> On Oct 7, 2011, at 1:22 PM, Lelio Fulgenzi wrote:
> 
>> Just curious, in a few bullets, why would one choose the AS5400 over the new 3900 ISR? Is it capacity? Available protocols? Interface type? 
>> 
>> ---
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Cooking with unix is easy. You just sed it and forget it. 
>>                               - LFJ (with apologies to Mr. Popeil)
>> 
>> 
>> From: "Mark Holloway" <mh at markholloway.com>
>> To: "Doug McIntyre" <merlyn at geeks.org>
>> Cc: cisco-voip at puck.nether.net
>> Sent: Friday, October 7, 2011 3:57:48 PM
>> Subject: Re: [cisco-voip] Cisco AS5400XM
>> 
>> Doug is right.  Back when I was supporting these we populated six slots of 108's and one channelized DS3 module.  It's been a while since I've spec'd these out, although those gateways are still cranking away.  They have up-times of 2+ years.  They run like a champ!
>> 
>> 
>> On Oct 7, 2011, at 12:34 PM, Doug McIntyre wrote:
>> 
>> > On Fri, Oct 07, 2011 at 01:59:36PM -0500, Kyle Sexton wrote:
>> >> Thanks for verifying my configuration.  Contacted Cisco and they came
>> >> back with different hardware than the list that I sent them:
>> >> 
>> >> (1) AS54-DFC-8CT1 (Octal T1/PRI DFC Card)
>> >> (1) AS5X-FC (Feature card with six PVDM DSP modules slots)
>> >> (4) AS5X-PVDM2-65 (64-Channel Packet Voice/Fax DSP modules)
>> >> 
>> >> I'm a little confused on the DSP differences, the list I sent to Cisco
>> >> was for two "AS5400 108 Voice/Universal Port Feature Cards" and
>> >> instead they send back a different feature card and some Voice/Fax DSP
>> >> modules.
>> > 
>> > 
>> > Probably because the AS54-DFC-108NP part is EOL'd.. 
>> > 
>> > http://www.cisco.com/en/US/prod/collateral/iad/ps505/ps507/prod_end-of-life_notice0900aecd804c6e98.html
>> > 
>> > Replacement part # AS5X-PVDM2-64
>> > 
>> > _______________________________________________
>> > cisco-voip mailing list
>> > cisco-voip at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/cisco-voip
>> 
>> 
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111008/5197e9a1/attachment.html>


More information about the cisco-voip mailing list