[cisco-voip] CUCM 8.0.3.20000-2 - Network Failover DOWN!
dschulz
dschulz at skyline-ats.com
Sat Oct 15 11:11:38 EDT 2011
Gig interface should be set to auto
Dave
On Oct 15, 2011, at 10:59 AM, "Buchanan, James" <jbuchanan at presidio.com> wrote:
> For starters, your Ethernet interfaces on the server are set to auto negotiate, but on the switch are hard-coded. Big no-no. Change the switch side first.
>
>
>
> James Buchanan| UC Technology Manager | Presidio South | Presidio Networked Solutions
>
> 12 Cadillac Dr Ste 130 Brentwood, TN 37027 | jbuchanan at presidio.com
>
> D: 615-866-5729 | F:615-866-5781 www.presidio.com
>
>
>
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Michel L. M. B. Perez
> Sent: Saturday, October 15, 2011 9:41 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CUCM 8.0.3.20000-2 - Network Failover DOWN!
>
>
>
> Hello Peolple,
>
> I have TWO DC, my publisher is connected to a Cisco 6504 Switch and de Subscriber is connected to 6509, my problem is that i´ve enabled bond0 interface (nic teaming at this two MCS7835 servers), but the port-channel is not coming up neither from the server side and from the switch side, anyone here has this working? Here are some outputs from my 6509.
>
> Server Config
>
> admin:show network failover
> Bond 0
> DHCP : disabled Status : up
> IP Address : 10.5.3.216 IP Mask : 255.255.000.000
> Link Detected: no Mode : Auto disabled, N/A, N/A
>
> Ethernet 0
> DHCP : disabled Status : up
> IP Address : IP Mask :
> Link Detected: yes Mode : Auto enabled, Full, 1000MB/s
>
> Ethernet 1
> DHCP : disabled Status : up
> IP Address : IP Mask :
> Link Detected: yes Mode : Auto enabled, Full, 1000MB/s
>
> DNS
> Primary : 10.5.3.3 Secondary : 10.5.3.102
> Options : timeout:5 attempts:2
> Domain : xxx.xxx.xx
> Gateway : 10.5.2.1 on Ethernet bond0
>
> Switch Config
>
> interface Port-channel11
> description description #### LACP - SRV-CUCM-FLN02 ####
> switchport
> switchport mode access
> spanning-tree portfast edge
> spanning-tree bpduguard enable
>
> interface GigabitEthernet1/41
> description #### CUCM - ETH1 ####
> switchport
> switchport mode access
> speed 1000
> duplex full
> no cdp enable
> channel-group 11 mode active
> spanning-tree portfast edge
> spanning-tree bpduguard enable
>
> interface GigabitEthernet1/42
> description #### CUCM - ETH2 ####
> switchport
> switchport mode access
> speed 1000
> duplex full
> no cdp enable
> channel-group 11 mode active
> spanning-tree portfast edge
> spanning-tree bpduguard enable
>
>
> SW_6509E(config-if-range)#do sh etherc 11 summ
> Flags: D - down P - bundled in port-channel
> I - stand-alone s - suspended
> H - Hot-standby (LACP only)
> R - Layer3 S - Layer2
> U - in use N - not in use, no aggregation
> f - failed to allocate aggregator
>
> M - not in use, no aggregation due to minimum links not met
> m - not in use, port not aggregated due to minimum links not met
> u - unsuitable for bundling
> d - default port
>
> w - waiting to be aggregated
> Number of channel-groups in use: 11
> Number of aggregators: 12
>
> Group Port-channel Protocol Ports
> ------+-------------+-----------+-----------------------------------------------
> 11 Po11(SD) LACP Gi1/41(I) Gi1/42(I)
>
> Last applied Hash Distribution Algorithm: -
>
> SW_6509E(config-if-range)#
>
>
>
> --
>
> Michel Perez
>
> Skype: michelmbperez
>
> michelmbperez at gmail.com
>
> http://br.linkedin.com/in/michelmbperez
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111015/9128b637/attachment.html>
More information about the cisco-voip
mailing list