[cisco-voip] group voip peers into trunk

[Nikolay Shopik]

What about inbound pots dial-peers and when using trunkgroup +max-calls 
or this is will have effect on all channels of E1, despite special 
created dial-peers for these numbers?
As I only want limit incoming calls for these dial-peers and not limit 
others.

On 17/10/11 19:48, Nick Matthews wrote:
> If you have say two interfaces Fa0/0 and Fa0/1, and you only want 3
> calls to go over Fa0/0, you can use call threshold interface Fa0/0
> ....
>
> If these three dial peers aren't mutually exclusive for that
> interface, then I don't know of a way without RSVP.  Unless they all
> had the same inbound dial peer, and then you could do a max-conn on
> inbound rather than outbound.
>
> -nick
>
> 2011/10/17 Nikolay Shopik<shopik at inblock.ru>:
>> Well, from what I understood this apply to all voip dial-peers, which is not
>> desirable, but possible to workaround.
>>
>> On 17/10/11 19:10, Nick Matthews wrote:
>>>
>>> If all three are going out the same interface, and no other dial peers
>>> do, you can use call-threshold to do something simple like the
>>> max-conn functionality.
>>>
>>> -nick
>>>
>>> On Fri, Oct 14, 2011 at 11:51 AM, Nikolay Shopik<shopik at inblock.ru>
>>>   wrote:
>>>>
>>>> Incoming call is from isdn (2xE1), then it goes to voip peer, but I have
>>>> to create 3 separate peers, because different numbers. So I would like to
>>>> limit max calls on these 3 peers as group, not separatly.
>>>>
>>>>
>>>> Bill Riley<bill at hitechconnection.net>    wrote:
>>>>
>>>>> So explain your problem in a little more detail it is not exactly clear
>>>>> what
>>>>> you are trying to accomplish.
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: Nikolay Shopik [mailto:shopik at inblock.ru]
>>>>> Sent: Friday, October 14, 2011 10:30 AM
>>>>> To: Bill Riley
>>>>> Cc: cisco-voip at puck.nether.net
>>>>> Subject: Re: [cisco-voip] group voip peers into trunk
>>>>>
>>>>> Nope, dial-peers are voip peers. I've tried to trunk-group but it seems
>>>>> not
>>>>> really possible to configure with voip peers.
>>>>>
>>>>> On 14/10/11 19:27, Bill Riley wrote:
>>>>>>
>>>>>> Are the dial-peer pointing to FXO ports? There is a trunk-group
>>>>>> command you can do on the voice-ports.
>>>>
>>>> --
>>>> Sent from grandma rotary phone.
>>>> Please excuse my brevity.
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>