[cisco-voip] Connected Party Line Presentation

[Semyon Taskin]

Problem description:

We currently have the following topology/setup for outbound PSTN calls. Phone (7962, 6921) ->  CUCM(8.6.1.2000) -> SIP TRUNK -  CUCM(8.6.1.2000) SME Edition-> SIP TRUNK -> CUBE -> Telco SBC. 

at the moment -> :
1. Phone dials 0.77772222 (from NSW)
2. Pattern 0.[2-9]xxxxxxx is being hit
2. goes to RL-RG-Trunk (with manipulation  - drop pre dot and prepend *5202 only on RG level)
3. hits outbound sip trunk with assert id unticked.
4. hits inbound trunk on SME with Remote-party-id and assert-id unchecked
5. goes to RP (*5!) and hits SIP trunk (no manipulation on RP/RG)
6. SIP trunk has assert -id unchecked
7. CAll received by cube and sent to dial-peer 52.T stripping 52 via translation-profile rules
8. CUBE has no remote-party-id under sip-ua

When dialling 0.77772222 to PSTN calls we see 077772222 on the phone while call is in Alerting state, however, once call is connected we see *520277772222.
We would like to see 077772222 while connected as well.



Regards,
Semyon
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111024/4775e7cb/attachment.html>